Select images for product info and authorized dealers for gear shown in this video.

  • JHS 4 Wheeler

Select images for product info and authorized dealers for gear shown in this video.

  • JHS 4 Wheeler

Bass fuzz has to be the sweetest thing ever. There is nothing like a tight bass line with fuzz driving it home. Our 4 Wheeler V2 will give you the ability to do everything from 60’s jam band to modern electronic fuzz. With Volume, Tone, Fuzz and a specially tuned Gate control, the ability to tweak away is at your fingertips. There is enough volume/headroom to shake any stage, as well as drive your amp as hard as you would ever need. The tone and fuzz controls are super flexible with usable sweeps all the way around, while the gate control can give you those much desired synth break-offs or just the right amount of jab for that perfect riff. The "Hi/Lo" toggle switch lets you go from a deeper, more low-end focused range of tones to the normal V1 settings.

Bass players are raving about it and guitar players even seem to love what it does to their tone, so this may be the fuzz to fit the bill...

This pedal requires standard 9V DC Negative power and measures 2.2"x4.3"x1.5"

VERSION HISTORY
V1 = Brown enclosure, yellow knobs.
V2 = Current production model, color changed to mustard. Hi/Low switch added.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download