60 Watts. Switchable Overdrive. Digital Reverb. Chorus. 12" Speaker.
The Dean Markley DM60RC Lead Guitar Combo amp has two switchable channels—Normal and OverDrive. Individual controls for Clean Volume, Drive Gain, Drive Volume, 4-Band EQ, Reverb, Chorus Speed, Chorus Depth, and Master Volume. With 60W RMS and its specially designed 12" Celestion speaker, this amp soars in all live situations. Dean Markley’s DM60RC lead amp also looks as great as it sounds.
With a handy MP3 input jack on the front panel, the back panel features a Drive Footswitch Jack—used for remote channel switching to select between Clean or Drive Channel and a Chorus/Reverb stereo Footswitch jack for remote switching of the on-board Reverb and Chorus effects.
INPUT: Instrument input
Clean Volume, Channel Select, Drive Gain, Drive Volume, Bass, Middle, Mid Sweep, Treble, Reverb, Chorus Speed, Chrous Depth and Master controls.
SEND/RETURN: EFX LOOP – Used for connecting effects or other external sound equipment.
MP3 IN: Unbalanced stereo input jack. This is an auxiliary input designed for use with an MP 3 player, tape player, CD player, etc. and can be used for playing prerecorded music.
HEADPHONES: This jack provides a stereo signal to drive headphones. The use of this jack will disengage the amplifiers internal speaker for quiet practice.
DRIVE FOOTSWITCH: Used for remote channel switching to select Clean or Drive Channel.
CHORUS/REVERB FOOTSWITCH: Used for remote switching of on board Reverb and Chorus effects.
Output Power: 60W RMS @ 8 ohms (12” Celestion speaker)
Weight: 33 pounds
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|