GearTunes    > Amps    > Morgan Amplification    >

AC20 Deluxe — $1,699.00 (Head); $700.00 (1x12 Cab with Celestion Blue)

The AC20 Deluxe combines the choice of EF86 or 12AX7 frontend, Normal or Brilliant channel voicing and power scaling. This makes the AC20 Deluxe one of the most versatile amps you can find in a 17x9.75x7.5 package. The Deluxe comes stock with a white faceplate so that your friends and bandmates will know you shelled out top dollar and a spared no expense in your quest for tone. Best part is that it is only 150.00 more that the regular AC20!

Open backed cabs designed to give you the largest soundstage possible from a single 12" speaker. These cabinets are all dove tail finger jointed with the best possible baltic birch available. I don't hide the quality of the wood under black paint on the inside of the cabs.

- Volume and cut and power level controls
- Bright switch
- Normal/Brilliant switch (cuts Bass)
- EF86/12AX7 switch on the back
- Hand made hand selected coupling caps
- Mercury Magnetics transformers
- Cathode Bias
- 2 12AX7
- 1 EF86
- 2 EL84 (4x EL84 for the 40 Deluxe)
- GZ34 rectified
- Dimensions: Head - 17w 9.75h 7.5d; Cab - 24W x 20.75H x 10D

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download