GearTunes    > Amps    > Fender    >

‘65 Deluxe Reverb (reissue) — List: $1,469.99 Street: $1099.99

Signal Chain

  • Elliott Guitars Peter Stroud Signature Custom Tone Master
  • Dunlop Manufacturing Tortex .50mm Red
  • Fishman Asterope Pro Studio AST-P15-SSG
  • Millennia Music & Media Systems HV-37
  • Radial JCR Reamp
  • Fishman Asterope Pro Stage AST-B20-SSN
  • Fender ‘65 Deluxe Reverb (reissue)
  • Triad-Orbit TRIAD-ORBIT System - T3/O2/M1
  • Audio-Technica AT4080
  • Universal Audio UAD-2 Satellite Quad Core

Clean Tone With Short Delay

  • Elliott Guitars Peter Stroud Signature Custom Tone Master
  • D’Addario EXP110 Coated Nickel Wound, Light, 10-46
  • T-Rex Replica
  • Fender ‘65 Deluxe Reverb (reissue)
  • Triad-Orbit TRIAD-ORBIT System - T1/O2/M1
  • Telefunken M80
  • Telefunken M81
  • Millennia Music & Media Systems HV-37
  • Avid Digi 003
  • Universal Audio UAD-2 Satellite Quad Core

The 22-watt ’65 Deluxe Reverb® amp is for rock, country or blues players who want a moderately powered amp they can crank up at the gig or in the studio. The full, snappy guitar tones heard on many famous recordings from Memphis to Abbey Road were made using the Deluxe™ amp. Features include dual 6V6 Groove Tubes® output tubes, one 5AR4 rectifier tube, four 12AX7 preamp tubes, two 12AT7 tubes, one 12” 8-ohm Jensen® C-12K speaker, dual channels (normal and vibrato), tube-driven Fender® reverb, tube vibrato, two-button footswitch for reverb and vibrato on-off, black textured vinyl covering and silver grille cloth.

General
Model Name: '65 Deluxe Reverb®, 120V
Model Number: 0217400000
Series: Vintage Reissue
MSRP: $1469.99
Color: Black
Amplifier Type: Tube

Electronics
Voltage: 120V
Wattage: 22 Watts @ 8 ohms
Inputs: Four - (1/4", Two Normal and Two Vibrato)
Auxiliary Input: N/A
Speaker Jack: Two 1/4" Parallel (Internal and External)
Channels: Two - (Normal and Vibrato)
Rectifier: Tube (1 x 5AR4)
Controls: Normal Channel: Volume, Treble, Bass. Vibrato Channel: Volume, Treble, Bass, Reverb. Vibrato: Speed, Intensity

Hardware
Cabinet Material: 7-Ply 5/8" Birch Plywood
Pilot Light Jewel: Red Jewel
Handle: Molded Plastic Strap with Nickel-Plated Caps
Front Panel: Blackface™ Style
Grill Cover: Black Textured Vinyl Covering with Silver Grille Cloth
Amplifier Depth: 9.5" (24.13 cm)
Amplifier Width: 24.5" (62.2 cm)
Amplifier Height: 17.5" (44.5 cm)
Amplifier Weight: 42 lbs. (19.05 kg)
Effects: Reverb, Vibrato

Speakers
Speaker: One - 12" Jensen® C12K with Ceramic Magnet
Impedance: 8 ohms

Tubes
Pre Amp Tubes: 4 x 12AX7, 2 X 12AT7
Power Tubes: 2 x 6V6

Miscellaneous
Unique Features: Tube Driven Spring Reverb, Tube Vibrato, 2-Button footswitch, Baltic Birch Plywood Cabinet

Accessories
FootSwitch: 2-Button Footswitch Included
Knobs: Skirted Amp Knobs
Accessories: 2-Button Footswitch Included
Cover: Optional Fitted Cover Available

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download