GearTunes    > Acoustic Amps    > Fender    >

Acoustasonic 150 Combo — $499.99

Select images for product info and authorized dealers for gear shown in this video.

  • Fender Acoustasonic 150 Combo

FENDER’S TOP-LINE ACOUSTIC AMP

The Acoustasonic 150 is Fender’s top-line acoustic amp, perfect for the acoustic guitarist who needs a loud, versatile and flexible amp loaded with useful and tonally innovative features. A lightweight amp that produces remarkable resonance and crystal clarity, it features a special voicing control that lets any guitar simulate the sound of parlor, dreadnought and jumbo acoustics. And for acoustic players who double on electric guitar, the voicing control also has blackface, tweed and British amp settings that make a second amp just for electric guitar unnecessary.

 

FEATURES

- 150-watt stereo power amp
- Dual instrument/mic channels with independent EQ and effects controls
- String Dynamics™ control tames harsh treble notes
- Reverb, delay, chorus, Vibratone and other effects
- XLR line out with level control and ground lift
- Voicing control simulates tone of different acoustic guitar types and electric guitar amps

 

ONBOARD EFFECTS

In addition to their fantastic uncolored sound, many Fender amps come equipped with onboard effects that convey a versatile wealth of tonal coloring, atmospherics and textures. Includes reverb, delay, chorus, tremolo and much more.

 

EFFECTS LOOP

For perfect placement of your outboard effects in the signal chain, this amp features an effects loop with dual ¼” send/return jacks.

 

VOICING CONTROL

For even more tonal variety, this amp is equipped with a special voicing control that lets any guitar simulate the sound of parlor, dreadnought and jumbo acoustics with a twist of the knob.

ELECTRONICS

VOLTAGE: 120V
WATTAGE: 150 Watts
CONTROLS: Instrument Channel: Volume, Treble, Mid, Bass, Voicing Select, String Dynamics, FX Select, FX Level. Microphone Channel: Volume, Treble, Bass, Voicing Select, FX Select, FX Level
CHANNELS: Two - (Instrument and MIC / INST)
INPUTS: Two - (One 1/4" and One XLR)
EFFECTS LOOP: 1/4" Stereo - (Send/Return)
LINE OUT: One - (Balanced XLR with Ground Lift and Level Control)

 

HARDWARE

CABINET MATERIAL: 5-Ply 5/8" Lightweight Plywood
AMPLIFIER COVERING: Brown Textured Vinyl
GRILLE CLOTH: Black
AMPLIFIER JEWEL: Red LED
HANDLE: Molded Plastic Strap with Nickel-Plated Caps

 

SPEAKERS

SPEAKERS: Two - 8" Foam-Surround Low-Frequency Drivers
TOTAL IMPEDANCE: 8 ohms

 

MEASUREMENTS

LENGTH (IN INCHES): 10.125
HEIGHT (IN INCHES): 16
WIDTH (IN INCHES): 22.37
WEIGHT (IN POUNDS): 22.5

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download