Select images for product info and authorized dealers for gear shown in this video.

  • Fender Acoustasonic 15

ULTRA-COMPACT ACOUSTIC CONVENIENCE

For the go-anywhere acoustic performer who needs ultra-compact convenience at a moment’s notice, the Acoustasonic 15 is just the right small amp with just the right sound. Perfectly portable, it delivers great tone and features for an acoustic guitar and a mic—ideal simplicity and flexibility for a variety of musical and basic public address uses at small gigs and gatherings.

 

FEATURES

- 15 watts
- 6” Fender Special Design speaker with enhanced high-frequency response
- Two channels (instrument, mic) with individual volume controls
- Chorus effect on instrument channel
- Headphone output
- Classic Fender look

 

6” SPEAKER WITH “WHIZZER” CONE

For more effective high-frequency response, the Acoustasonic 15 bears the unusual distinction of being the only Fender guitar amp to use a “whizzer” cone—a small supplementary speaker cone attached to the voice coil of the amps 6” speaker.

 

BUILT-IN CHORUS

For extra ambient depth and shimmer, the Acoustasonic 15’s instrument channel features a built-in chorus effect.

 

XLR AND ¼” INPUTS

The Acoustasonic 15’s convenient dual front-panel inputs include a standard ¼” jack for an instrument and an XLR input for a microphone.

ELECTRONICS

VOLTAGE: 120V
WATTAGE: 15 Watts
CONTROLS: Instrument Channel: Volume, Bass, Middle, Treble, Chorus. Microphone Channel: Volume, Bass, Middle, Treble.
CHANNELS: Two - (Instrument and Microphone)
INPUTS: Two - (One 1/4" and One XLR)

 

HARDWARE

CABINET MATERIAL: 5-Ply 5/8" Lightweight Plywood
AMPLIFIER COVERING: Brown Textured Vinyl
GRILLE CLOTH: Black
AMPLIFIER JEWEL: Red LED
HANDLE: Molded Plastic Strap with Nickel-Plated Caps

 

SPEAKERS

SPEAKERS: One - 6" Fender® Special Design
TOTAL IMPEDANCE: 4 ohms

 

MEASUREMENTS

LENGTH (IN INCHES): 7.13
HEIGHT (IN INCHES): 11.5
WIDTH (IN INCHES): 11.19
WEIGHT (IN POUNDS): 10.5

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download