GearTunes    > 5 String    > Fender    >

American Standard Precision Bass V — List: $1,949.99 Street: $1,449.99

The five-string American Standard Precision Bass® V is the same solidly powerful instrument it has always been - the indestructible workhorse instrument for the bassist who wants the greater range of a five-string.

General

Model Name: American Standard Precision Bass® V (Five String), Rosewood Fingerboard, 3-Color Sunburst
Model Number: 0193650700
Series: American Standard
Advertised Price: $1449.99


Body

Body Material: Alder
Body Finish: Urethane
Body Shape: Precision Bass®


Neck

Neck Material: Maple
Neck Finish: Satin Urethane Finish on Back of Neck with Gloss Urethane Headstock Face
Neck Shape: Modern "C"
Scale Length: 34" (864 mm)
Fingerboard: Rosewood
Fingerboard Radius: 9.5" (241 mm)
Number of Frets: 20
Fret Size: Medium Jumbo
String Nut: Synthetic Bone
Nut Width: 1.875" (47.6 mm)
Position Inlays: Black or White Dot
Truss Rods: Posiflex™ Graphite Neck Support Rods
Truss Rod Nut: 3/16" Hex Adjustment
Neck Plate: 4-Bolt Standard


Electronics

Middle Pickup: American Standard Alnico V Split Single-Coil Precision Bass
Controls: Master Volume, Master Tone
Pickup Configuration: Split Single-Coil


Hardware

Bridge: 5-String High Mass Vintage (HMV), (Strings-Through-Body or Topload)
Hardware Finish: Chrome
Tuning Machines: Fender "F" Light-Weight Vintage-Paddle Keys with Tapered Shafts
Pickguard: 4-Ply Tortoiseshell
Control Knobs: Knurled Flat-Top


Miscellaneous

Strings: Fender® USA Bass 8250/5M, NPS, (.045, .065, .085, .110TW, .130TW Gauges)
Unique Features: Posiflex™ Graphite Neck Support Rods, Rounded Body Shape, Rolled Fingerboard Edges, Tinted Neck


Accessories

Polishing Cloth: Polishing Cloth Included

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download