SUPER-SONIC SOUND AND STYLE
Super-Sonic amps are the favorites of pro guitarists in many genres who love glorious Fender clean tone and expressive modern high-gain from one no-nonsense tube amp. Perfect for stage and studio, the Super-Sonic 60 212 enclosure pairs perfectly with Super-Sonic heads and other quality tube amps. Unlike most other 2x12” enclosures, this classic Fender design includes internal insulation and an oversized baffle board with a slight tilt for a distinctively rich and resonant response. Available in classic Black/Silver and 1961-style Blonde/Oxblood.
- Rated at 120 watts
- Dual Celestion® Vintage 30 speakers
- Available in two looks—Black/Silver and 1961-style Blonde/Oxblood
- Baltic birch plywood cabinet
- Fitted cover and pop-out casters included
Solidly built and sonically superior, Fender guitar amp cabinets and extension cabinets are prized by guitarists everywhere—from novices to the world’s greatest players—for their sound, style and durability.
ASSEMBLED IN THE U.S.A.
Just like the great Fender guitar amps of the 1950s and ’60s that founded our amp legacy and defined the essence of pure tone and power, this amplifier is assembled in the United States.
Originally hailing from the U.K., Celestion speakers are acclaimed worldwide for their distinctive British tonal flavor, with a more modern sound and an utterly classic roar when pushed.
INPUTS: One - 1/4"
SPEAKER JACK: Two 1/4" Parallel
POWER HANDLING: 60 watts into 8 ohms
CABINET MATERIAL: 7-Ply 3/4" Birch/Maple Plywood
AMPLIFIER COVERING: Black Textured Vinyl
GRILLE CLOTH: Silver
AMPLIFIER JEWEL: None
HANDLE: Molded Rubber "Dog Bone" Style
SPEAKERS: Two - 12" Celestion® Vintage 30
TOTAL IMPEDANCE: 8 ohms
Pop-out Casters, Owner's Manual, Bumper Sticker
Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.
For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.
For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.
I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)
|Play||Right Click to Download|