GearTunes    > 2x12 Closed Back    > Orange    >

PPC212 — List: $1,029 Street: $749

Signal Chain

  • Ibanez ART500E
  • Dunlop Manufacturing Tortex .88mm Green
  • Orange Dark Terror
  • Orange PPC212
  • Celestion Vintage 30, 16 ohm
  • Royer Labs R-121
  • Shure SM57
  • Avid Digi 003
  • Universal Audio UAD-2 Satellite Quad Core

2 X 12″ Closed Back Speaker Cabinet featuring (2) 60 Watt Celestion Vintage 30 Speakers.

Orange speaker cabinets, like our amplifiers, are built to last using extremely rugged construction and manufacturing techniques. Every Power Projection Cabinet (PPC) is built using 13 ply high density 18mm Baltic Birch plywood. Our unique skid feet design helps to acoustically couple our cabinets to the stage, thus providing a tighter bass response and full range tone definition. The result is a laser-focused tone that’s full of warm midrange.

Features
18mm high density 13 ply Baltic Birch enclosure
2 x parallel 1/4" jacks
Orange Tolex
Basketweave grill cloth
Skid design feet

Power Handling
120 Watts

Speakers
2 x 12" Celestion Vintage 30

Impedance
16 Ohms

Unboxed Dimensions
Height: 53cm, 20.87in
Width: 78cm, 30.71in
Depth: 38cm, 14.96in

Unboxed Weight
31.65kg, 69.78lb

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download