GearTunes    > 1x12 Open Back    > Fargen Amps    >

Retro Classic 1x12 Cabinet — Street: $769

Signal Chain

  • Fender Yngwie Malmsteen Stratocaster
  • Sonic Edge Tumbleweed
  • TC Electronic Nova Reverb NR-1
  • Fargen Amps Retro Classic
  • Fargen Amps Retro Classic 1x12 Cabinet
  • Avid Digi 002
  • Universal Audio UAD-2 Satellite Quad Core

Signal Chain

  • Fender Yngwie Malmsteen Stratocaster
  • Dunlop Manufacturing Tortex 1mm Blue
  • Vox Time Machine
  • Fargen Amps Retro Classic
  • Fargen Amps Retro Classic 1x12 Cabinet
  • Avid Digi 002
  • Universal Audio UAD-2 Satellite Quad Core

Dovetail-jointed 18mm (3/4″) high-grade Baltic Birch cabinet with 13mm (1/2″) high-grade Baltic Birch speaker baffle and rear panel. Specially developed oval semi-open back achieves optimum tonal balance while adding integrity to the cabinet structure. Pocket Hole Screw cabinet corner reinforcement, 7/8″ Bracing, hardened fasteners and black powder coated steel hardware.

Starting with the Ultimate Speaker Demo, an ever-increasing number of the GearTunes audio  clips are being tracked using the Radial JCR Reamp. The Reamp was invented by my good friend and colleague John Cuniberti who engineered/co-produced many of Joe Satriani's most infamous recordings.

For GearTunes, reamping allows me to record a track where the guitar "hears" the amp in the room, but initially only the guitar or guitar and effects signal is recorded. This allows me to spend additional time perfecting amp tones and mic placement once I have the performance I'm looking for. One of the byproducts of this process is the creation of GearTunes DI Clips which enable you to play select guitars and effects through your amp by using your mobile device or computer as a reamp device.

For GearTunes DI Clips - and Gear Tune DI Clips ONLY (always found under the DI clips tab for gear that has one), you can play our guitar and effects through your amp. Simply use an unbalanced cable that terminates with an 1/8th inch jack on one end and a 1/4 inch jack on the other. Connect the 1/8th jack to the output of your mobile device or computer and the 1/4 inch jack into the front of your amp. Start off with your amp volume at zero and your mobile device (or computer) volume all the way up to ensure you hit the front end of the amp with enough signal, and then gradually increase the volume of the clean channel on your amp until you reach a level that is not capable of causing damage to your ears or equipment. GearTunes accepts no liability for the use, abuse or misuse of these clips, and playing them into your amp is done exclusively at your own risk.

I am tremendously excited about being able to share GearTunes DI Clips with you as you journey on your quest to find right gear for the music you play! Cheers ~ Doug:)

Play Right Click to Download